Digital Thermal Laminating Film for Super Stick Printing (35mic Gloss & 35mic Matt)

• Customization: Available
• Industrial Use: Printing
• Transparency: Transparent
• Model NO.: 1 Inch, 2 Inches, 3 Inches
• Layered: Basic Level
• Hardness: Soft
• Basic Level: BOPP
• Heat Seal: EVA
• Packaging: Carton+Pallet
• Thickness: 35mic
• Width: 300~1800mm
• Length: 200~3000m
• Paper Core: 25.4mm (1 Inch), 58mm(2.25inches), 76mm(3 Inches)
• Transport Package: 1 Roll per carton
• Specification: SGS, ISO9001: 2008
• Trademark: FS EKO
• Origin: China Guangdong
• HS Code: 3920
• Production Capacity: 400 Ton Per Month

Product Description

*About EKO

FSEKO has been in the field of lamination film for over 10 years. The Lamnition Films are SGS tested with the approval of patent. And the quality is controlled by the quality system ISO 9001: 2008.
 

*Material

Surface layer: BOPP
Glue layer: EVA adhesive

*Specification

Thickness: 35mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2



*Process parameter:

Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min
 

 

*Directions for using BOPP thermal laminating film:

Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.
 

*Packing:

 

SPECIFICATION		35 micron GLOSS		35 micronMATT
WEIGHT	m² /kg	30.63		31.65
	kg/m²	0.03265		0.0316
Width	300 - 1800 mm Upon customer' s requirement
Length	200 - 3, 000M(more or less 10% allowed)
CoronaTreatment  Side	One Side		Both Side
Connector	Less than 2
Paper Core (inter  Diameter)	25mm(1 inch); 58mm(2.25 inches); 76mm(3 inches)