24mic Pet Thermal Laminating Film for Normal Printing with EVA Glue

• Transparency: Transparent
• Layered: Basic Level
• Hardness: Soft
• Basic Level: Pet
• Heat Seal: EVA
• Packaging: Carton+Pallet
• Model NO.: FSEKO-03
• Surface Layer: Pet
• Glue Layer: EVA Adhesive
• Transport Package: 1 roll per carton
• Specification: ROHS SGS
• Trademark: FSEKO
• Origin: Shun De, China
• Production Capacity: 4000 Tons/Year

Product Description

*Material

Surface layer: PET
Glue layer: EVA adhesive
 

*Specification

Thickness: 24mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2
 

*Process parameter:

Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min
 

 

*Directions for using BOPP thermal laminating film:

Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.

*Packaging: