Extra Sticky Thermal Laminating Film Used for Photopapers for Advertising Inkjet Paints

• Customization: Available
• Transparency: Transparent
• Layered: Basic Level
• Model NO.: 27mic gloss 27mic matt
• Basic Level: BOPP
• Heat Seal: EVA
• Packaging: Carton+Pallet
• Thickness: 35mic
• Transport Package: 1 or 6 Rolls Per Carton
• Specification: ROHS SGS
• Trademark: FSEKO
• Origin: Foshan, China
• Production Capacity: 4500 Tons/Year

Product Description

*Material

Surface layer: BOPP
Glue layer: EVA adhesive






*Specification

Thickness: 27mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2




*process parameter:

Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min



*directions for using BOPP thermal laminating film:

Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place


 

1(25mm), 2.25(58mm), 3(76mm)
Bonding				2 or less than 2
Laminating Direction
			Normal		Special
Temperature			85 ~ 100 º C		100 ~ 110 º C
Roll Pressure			8 ~ 15Mpa		16 ~ 25 Mpa
Speed			5 ~ 30 M/min		5 ~10 M/min
Lamination Equipment			dry and wet laminator
Remarks			Special laminations refer to those with thick ink, dark color, much moisture and large size paper
Packing
Rolling pachage, Paper box(export specification);
In pallet individual corrugated boxes;
Storage
The product should be stored in a dry, well ventilated warehouse. To aviod direct sunlight, the product should not be stored in the open air.