BOPP Thermal Laminating Film (offset printing for gloss and matt)

• Transparency: Transparent
• Layered: Basic Level
• Hardness: Soft
• Basic Level: BOPP
• Heat Seal: EVA
• Packaging: Carton+Pallet
• Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30
• Transport Package: 1 roll per carton
• Specification: Thickness: 24 mic; 25 mic; 27 mic
• Trademark: FOSHAN EKO
• Origin: Shun De, China
• Production Capacity: 400 Ton Per Mouth

Product Description

*Material

Surface layer: BOPP
Glue layer: EVA adhesive
 

*Specification

Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30mic/35mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2



*Process parameter:

Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min

 

 

*Directions for using BOPP thermal laminating film:

Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.

*Packaging: